ISO/IEC 17025 Questionnaire

PJCINC

Home
About PJC
Standards
Consulting
Training
Resources
Contact PJC

You are here: Home / Standards / ISO/IEC 17025 / ISO/IEC 17025 Questionnaire

What Service(s) Are You Seeking?
- Full Implementation Assistance
- Transition Assistance
- Internal Auditing
- Training
- General Consulting
- Other
Describe:
COMPANY/CONTACT INFORMATION
Company Name:*
Contact Name:*
First Last
Address:*
Street Address City State / Province / Region ZIP / Postal Code Country
Phone:*
Email:*
Website:
If More Than One Location, Please Provide The Address(es) Here:
Please Indicate Your Target Date To Achieve Accreditation By:
Date Format: MM slash DD slash YYYY
How Did You Hear About PJC?
- Website
- Referral
- Tradeshow
ORGANIZATION
Is The Main Location Certified To ISO 9000?*
- Yes
- No
Is This Laboratory Internal To A Larger Company Doing Other Activities?*
- Yes
- No
If Yes, Describe The Main Facility Activities:
Please Indicate The Industry(ies) You Service:*
- Agriculture
- Automotive
- Aerospace
- Construction
- Consumer Product Safety Commission (CPSC)
- Cosmetic
- Cannabis
- DoD
- Drug
- Environmental
- EPA Energy Star
- Food
- Forensic
- Medical
- Nuclear
- Textile
Industry(ies) You Service Other Than Those Listed Above:
STAFF EMPLOYED BY THE ORGANIZATION
# Of Technicians:*
# Of Support Staff:*
Total #:*
How Many Technicians Are Performing Services Outside Of Your Facility?*
How Many Shifts Of Employees Are Involved With Your Activities?*
CALIBRATION - COMPLETE THIS SECTION
Type Of Calibration (Check All That Apply):
Electrical Calibration – (i.e. Voltage, Current, Amperage):
- On-Site
- Client
Dimensional Calibration – (i.e. Gage Block, CMM, Caliper, Pin Gage, Micrometer, Optical Comparator):
- On-Site
- Client
Time & Frequency Calibration – (i.e. Stopwatch, Frequency Counter):
- On-Site
- Client
Acoustic Calibration – (i.e. Sound, Vibration):
- On-Site
- Client
Mass Calibration – (i.e. Balances, Weight Sets):
- On-Site
- Client
Thermodynamic – (i.e. Thermocouple, Relative Humidity Meter, Thermometer):
- On-Site
- Client
Chemical Calibration – Calibration of instrumentation used for chemical analysis (i.e. pH Meter, Conductivity Meters and IR Spectrophotometer):
- On-Site
- Client
Mechanical Calibration – (i.e. Hardness Machines, Force, Torque, Tension, Flow Meter, Colorimeter, Gloss Meter, Pressure Gauges):
- On-Site
- Client
TESTING - COMPLETE THIS SECTION
Number Of Tests:
Type Of Test (Check All That Apply):
Acoustical Testing – Measurements of noise, vibration, and sound level testing:
- On-Site
- Client
Mechanical Testing – Test, measurements and evaluation of physical properties of materials, components and assemblies:
- On-Site
- Client
Microbiological Testing - Microbiological tests and methods used for bacteriological analysis:
- On-Site
- Client
Optical Testing – Tests for the performance of fiber optic components, cable plants and systems:
- On-Site
- Client
Thermodynamic Testing – Tests of measurements and transformations of energy to heat:
- On-Site
- Client
Chemical Testing – Chemical analysis and detection including instrumental and automated methods:
- On-Site
- Client
Biological Testing – Biological, microbiological and biochemical testing and measurement:
- On-Site
- Client
Electrical Testing – Test of an electrical and electronic nature performed on instruments, equipment, appliances, components and materials:
- On-Site
- Client
Dimensional Inspection – Determination of dimensional parameter to establish magnitude or for comparison to defined nominal:
- On-Site
- Client
Environmental Testing – Tests for constituents in various environmental media:
- On-Site
- Client
Non-Destructive Testing – Examination of materials, components and assemblies to detect discontinuities without damaging the material, component or assembly:
- On-Site
- Client

Receive News & Updates From PJC

Subscribe to our mailing list:

PJC Implementation Process

Training

MORE INFO / REGISTER NOW!

Testimonials

Our consultant, Jim Johnson, was extremely helpful not only during the implementation process but afterwards. Kudos to Jim and the staff of PJC!

Ken SeloverQuality ManagerStructural Diagnostics, Inc.

Mahindra Automotive North America (MANA) Manufacturing challenged Perry Johnson Consulting (PJC) to help implement ISO 9001:2015 while ramping up production for our ROXOR off-road vehicle. MANAM was focused on a streamlined, high-level approach to build quality into our manufacturing processes and develop the Quality Management System. PJC was a true partner! Our consultant, Nancy, embraced our approach and kept us focused on key ISO deliverables. She guided us to a successful ISO implementation… Read more

Denise VallisProject ManagerMahindra Automotive North America

From quoting to certification, everyone at Perry Johnson Consulting has been professional and a valued partner. Their auditors demonstrate a vast knowledge of quality standards and are able to translate them to real world application.

Matt NorbergQuality Control ManagerNational Products Inc.

Steve was a wonderful auditor. He was very professional and thorough. He took time to answer my questions about different parts of the standard. I would recommend him to other companies needing an internal audit.

Kelli BradburyPrecision Die Technologies

Hiring Perry Johnson to help us get certified to ISO 9001:2015 was the right move on our part. They did an excellent job on our documentation. Perry Johnson also answered a lot of questions for me going up to the audits which helped greatly. WE passed the audit in June. Thank you for your help, it was money well spent. I will refer you to anyone I talk to about this.

Tony BriaQuality ManagerHydra-Matic/Fabrics For Industry

PJC did consulting for us for our ISO 9002:2015 system and we found them to be professional and listened to our needs. They created a system that was easy to implement and use on a daily basis.

Kraig ReichwaldVP of ManufacturingCustom Metal Products

Wayne’s expertise in ISO 9001:2015 was essential in Vonco Products attaining our ISO certification. His knowledge was a great help improving our system by eliminating waste while assisting in developing our QMS.

Mike DeleoQuality ManagerVonco Products

Michael was instrumental in helping us make this transition much less stressful than I thought it would be. His attention to detail and expertise prepared us for our recertification audit. His professional demeanor made him a pleasure to work with.

Tyler HawkOperations ManagerCross Technologies Group, Inc.

We have been using Perry Johnson Consulting for 5 years and have never had a bad experience. With their expertise and knowledge of the ISO programs they have guided and helped us achieve an outstanding QMS. Thank you to all the friendly and professional people at PJC and we hope to have a long lasting relationship.

Larry ReimersQuality ManagerCTG, Inc.

Thought I’d drop a line to you and the staff to say thank you all very much for your dedicated hard work. You helped save our company, and I’m sending you all a heartfelt thanks!

Kevin J. CoffeyPresidentAlert Tubing Fabricators Inc.